J615W threaded pneumatic angle seat valve Detail: within J615W pneumatic angle seat valve between the external thread of advanced lead angle seat valve, overflow port and the slider has self-adjusting gland, when compared with the normal cut-off valve, the valve angle Block structure can achieve greater traffic. Threaded pneumatic angle seat valve technology parameters pressure range 0 ~ 16bar medium temperature -10 ℃ ~ + 180 ℃ ambient temperature of -10 ℃ ~ + 60 ℃ Air pressure 0.4 ~ 0.7Mpa body material CF8, CF8M CF3, CF3M sealing material poly tetrafluoroethylene actuator housing material Polyamide control gas neutral gas, internal air thread pneumatic angle seat valve choose - control function: normally open -PPS actuator housing is suitable for ambient temperature + 5 ℃ ~ + 130 ℃ - no return spring double acting actuator - three clip-on connection - independently adjustable travel limits, suitable for low flow - manual override switch - within the applicable Namur pilot valve threaded seat valve pneumatic angle adapter interface parameters D [inch] bore [mm] KV value [ m / h] Maximum operating pressure [bar] requires a minimum control pressure [bar] Actuator size [mm] flow control function G3 / 8 "13 3.7 0 ~ 16 4 ~ 7 40 seats above the G1 / 2" 15 4.2 0 ~ 164 ~ 750 above the valve G3 / 4 "20 8. 0 ~ 16 4 ~ 7 50 above the seat G 1" 25 19 0 ~ 16 4 ~ 7 63 above the valve G1 1/4 "32 27.5 0 ~ 164 ~ 763 above the valve G1 1/2 "40 42 0 ~ 16 4 ~ 7 63 above the seat G 2" 50 52 0 ~ 16 4 ~ 7 80 above the seat G2 1/2 "65 77 0 ~ 16 4 ~ 780 above the threaded pneumatic angle seat valve seat dimensions interface D [inch] bore [mm] Actuator size [mm] ABCEFHA / F G1 / 2 "15 50 85 173 13 64 44 137 27 G3 / 4 "20 50 95 178 14 64 44 145 32 G 1" 25 63 105 200 18 80 52 173 41 G1 1/4 "32 63 120 225 19 80 52 210 50 G1 1/2" 40 63 130 235 19 80 52 245 55 G 2 "50 80 150 290 23 101 61 301 70 G2 1/2" 65 80 185 315 30 101 61 315 70